Site Automation in Kansas City, MO

One Backyard, One Set of Controls

A backyard rarely stops at the pool deck, yet the lighting, irrigation, water features and gates around it usually run on four unrelated timers nobody has touched in years. KC Pool and Spa builds site automation for properties in Kansas City, MO, and out through Loch Lloyd, Missouri, Lake Quivira, Kansas and Mission, Kansas, bringing the whole outdoor environment under one hub instead of a drawer full of remotes. Planning comes before hardware here, so we walk the property, map the zones you actually use after dark and design a network that reaches the far corners before anything is wired. Family-owned and operating as a licensed general contractor since 2012, we are fully insured, and our 2-year warranty covers materials and workmanship on every installation. Emergency support is available 24/7 if a system goes down. Tell us about your property through our contact page and we will sketch out a workable layout.

Free Estimate!

For the fastest reply, call or text us 24/7 at 816-890-3537

Free Estimate!

For the fastest reply, call or text us 24/7 at

Contact Us

Site Automation We Provide

Lighting Zones and Scenes

Path lights, tree uplights, deck fixtures and architectural washes each want their own control. Grouping them into zones, then saving those zones as recallable scenes, means one tap sets the entire property for dinner, swimming, a party or quiet late-night navigation.


Water Feature Control

Fountains, sheer descents, bubblers and streams draw attention when they run and waste energy when they do not. Automated control starts them for guests, quiets them at bedtime, and shuts everything down cleanly during freezing weather without anyone checking a valve.


Fire Feature Automation

Fire bowls, pits and linear burners tie into the same system through approved ignition modules and safety interlocks. Ignition happens on command from a keypad or an app, with automatic shutoff timers and wind or gas cutoffs handled by the controller.


Irrigation Tie-In

Existing irrigation controllers can often join the hub rather than being replaced. Once connected, watering schedules coordinate with lighting and pool activity, soil sensors adjust run times, and you can pause a zone from indoors when the yard is in use.


Gate and Cover Integration

Driveway gates, side gates and automatic pool covers become part of the same control layer. Closing routines can secure the cover and gates together at a set hour, and status shows in the app so nothing is left open overnight.


Hub and Network Setup

Coverage decides whether outdoor automation is reliable or frustrating. We install hardened access points, run buried data lines where distance demands it, and configure the hub so devices spread across an acre answer as quickly as ones near the house.

    How Automation Simplifies Property Management

    One App Instead of Six

    Separate apps for lights, irrigation, gates and features guarantee that half of them never get opened. One interface holding every outdoor device makes the system something your household actually uses rather than an expensive collection of forgotten logins.

    Evenings You Can Set in Advance

    Walking the yard flipping switches ends the moment scenes exist. Sunset triggers bring the property up gradually, a dinner scene dims the far zones, and a late setting leaves just enough light for anyone finding their way inside.

    Real Confidence After Dark

    Dark corners, an open gate and an uncovered pool are the three things that keep parents awake. Automated closing routines handle all three on schedule, and the app confirms their status without anyone putting shoes on to go look.

    Features That Run at the Right Moment

    Fountains and fire bowls left to manual operation mostly sit idle year after year. Programmed to start when guests arrive and to stop when the evening ends, they earn back what they cost while never running unattended into the small hours.

    A Landscape That Waters Sensibly

    Sprinklers running in the middle of a rainstorm are an old and expensive joke. Weather-aware scheduling skips cycles the forecast makes unnecessary, shortens them in cool weather, and keeps planting healthy on noticeably less water across a long summer.

    Room to Grow Later

    Backyards get added to over time, whether that means a pergola, an outdoor kitchen or a second seating area. Properly specified hubs and networks accept new devices as they arrive, so later projects extend the system rather than starting another one.

    Testimonials


    See What Our Customers Are Saying!

    A Backyard That Responds to You

    Outdoor spaces get used in proportion to how easy they are to switch on. A yard that needs 10 minutes of preparation before anyone sits down tends to stay empty, while one that lights, warms and settles itself with a single tap becomes part of ordinary evenings. KC Pool and Spa designs site automation around that difference for homeowners in Kansas City, MO, starting with how you already live outside rather than with a hardware list. Nothing has to be done at once, and phasing the work over 2 seasons is perfectly normal. Send us your property details through our quote form whenever you are ready to talk it through.
    Frequently Asked Questions

    Can landscape lighting and pool lighting run on the same system?

    Yes, and combining them is usually the point. KC Pool and Spa ties pool, spa and landscape circuits into shared scenes on properties around Kansas City, MO, so the water and the surrounding yard change together instead of being switched separately.


    What is a lighting scene?

    A scene is a saved combination of zones, brightness levels and colors that recalls with one command. Rather than adjusting eight separate fixtures, you select the setting you want and every light moves to its assigned state at once.


    Can irrigation be controlled from the same app as outdoor lighting?

    Many modern irrigation controllers integrate directly with automation hubs, and older units can be brought in through relay modules. Once linked, watering avoids running while the lights are set for entertaining or while the pool is in use.


    Do outdoor automation systems need their own network?

    Not a separate network, but they do need reliable coverage outdoors. Household routers rarely reach the back of a property through masonry and distance, so outdoor-rated access points or buried data cable usually get added during installation.


    Can a gate or pool cover be automated?

    Both integrate readily when the existing hardware has a control input, which most powered gates and automatic covers do. Where the mechanism is fully manual, an actuator or motor has to be fitted before any automation can operate it.


    How far can automation reach across a large property?

    Wired connections carry reliably for hundreds of feet, and mesh devices extend coverage further where trenching is impractical. KC Pool and Spa designs layouts for larger Kansas City, MO, lots by mapping distances first, then choosing wired or wireless per zone.


    Will smart controls work with the fixtures I already have?

    Low-voltage lighting on standard transformers usually adapts without replacement, since the control happens upstream at the transformer. Color-changing effects and per-fixture dimming, however, require fixtures built for it, so those zones may need new heads.


    Can outdoor automation adjust itself for weather?

    Weather-based scheduling is standard on current systems. Local forecast data can delay irrigation ahead of rain, shut water features down before a freeze, and shift lighting times through the year as sunset moves by nearly 3 hours.