Swimming Pool Renovations in Kansas City, MO

Bring the Whole Backyard Up to Date

A pool built in the 1990s can drag down an otherwise good backyard, and the shell is rarely the problem. KC Pool and Spa takes on swimming pool renovations across Kansas City, MO, and neighboring communities including Liberty, Missouri, Leawood, Kansas, and Lake Quivira, Kansas, reworking coping, tile, decking, steps, water features and equipment into one modern design. Remodeling an existing pool means working around what is already there, so we survey the deck, plumbing and structure before drawing anything you might fall in love with. Family-owned since 2012, licensed as a general contractor and fully insured, we back renovation work with a 2-year warranty on materials and workmanship. Phasing matters too, and most projects can be staged so the yard stays usable between the demolition and the finish work. Share photos and a rough wish list through our quote form and we will map out what your pool can become.

Free Estimate!

For the fastest reply, call or text us 24/7 at 816-890-3537

Free Estimate!

For the fastest reply, call or text us 24/7 at

Contact Us

Swimming Pool Renovations We Provide

Coping Replacement

Cantilevered concrete, travertine and cut stone all change how a pool edge reads, and old coping usually hides deteriorated bond beam. Removal exposes that joint for repair before new material is set level, sealed and finished to a comfortable rounded edge.


Waterline Tile Upgrades

Nothing dates a pool faster than 6-inch blue squares from another era. Glass mosaic, porcelain and stacked stone bands give the waterline a current look, and replacement is the moment to correct the grout line that has been failing for years.


Pool Deck Rebuilds

Cracked, heaved concrete around a pool is both an eyesore and a trip hazard. Broken slabs come out and stamped concrete, pavers or exposed aggregate goes down over corrected drainage, widening the lounging area where the old deck ran tight.


Step and Bench Additions

Ladders get replaced by entry steps, sun shelves and swim-up benches during a remodel, which changes how the pool gets used. Cutting these into an existing shell requires structural tie-in, fresh rebar and finish work that blends with the original.


Water Feature Installation

Sheer descents, bubblers, scuppers and raised walls add sound and movement that a flat rectangle of water never had. Each one needs dedicated plumbing and its own pump circuit, which is far simpler to install during a renovation than afterward.


Equipment Modernization

Single-speed pumps, mechanical timers and cartridge filters sized for a smaller pool belong to an older era. Swapping in variable-speed pumps, app-based automation, LED lighting and right-sized heaters cuts running costs and puts everything on one control panel.

    How Renovation Improves Function, Style, and Value

    A Backyard You Actually Use

    Tired pools get avoided. Fresh coping, current tile and a deck with room for furniture turn a neglected corner of the yard into the place everyone drifts toward on a warm evening, which is what you paid for originally.

    Space That Fits How You Entertain

    Older pools were built for swimming laps, not for lounging with a drink in six inches of water. Adding a sun shelf, wider steps and a seating bench reshapes the pool around how your family actually spends time outside.

    Safer Footing Around the Water

    Lifting slabs, rough coping edges and slick old concrete cause more backyard injuries than deep water does. New decking laid to proper slope, with rounded coping and a textured surface, gives bare feet grip and drains rain away from the pool.

    One Project Instead of Five

    Handling tile, coping, decking and equipment as separate jobs across separate years means repeated demolition and repeated mess. Bundling the work into one renovation shares the setup, protects finished surfaces from the next trade, and gets the yard back in one go.

    A Pool That Matches the House

    Pools installed 30 years ago rarely relate to the house standing next to them. Choosing materials that echo your stone, siding and interior palette makes the pool read as part of the property instead of something dropped into the lawn.

    20+ More Years From the Pool You Have

    Renovation extends the working life of a pool by 20 years or more without the disruption of demolition and a new build. Your existing shell stays, the surroundings change, and the swim season next summer is not lost to construction.

    Testimonials


    See What Our Customers Are Saying!

    A Pool Worth Looking At Again

    Homeowners considering a remodel usually know exactly what bothers them: the coping, the tile, the deck or the fact that nobody swims anymore. KC Pool and Spa turns that list into a plan for pools across Kansas City, MO, working from the structure outward so the money goes where it actually changes something. Some yards need everything, and plenty need only two or three changes to feel completely different. There is no obligation attached to a conversation about options, and no timeline you have to commit to. Send photos and your thoughts through our quote form, and we will put together a renovation plan that fits.
    Frequently Asked Questions

    How long does a pool renovation take?

    Most remodels run 3 to 6 weeks depending on demolition, with deck replacement and structural changes at the longer end. KC Pool and Spa schedules renovation work in Kansas City, MO, around the swim season so the pool is ready by summer.


    What is included in a typical pool remodel?

    Coping, waterline tile, decking, interior finish and equipment make up the core of most remodels. Optional additions include sun shelves, water features, automation, lighting and layout changes such as filling in a diving well or widening the shallow end.


    Can I change the shape of my existing pool?

    Yes, within certain limits. Gunite pools accept structural modification such as squaring off a kidney curve, filling a deep end or extending one side, while fiberglass shells and vinyl walls allow far less reshaping without replacing the shell entirely.


    Can I add a tanning ledge to an existing pool?

    Tanning ledges can be added to concrete pools by cutting into the existing shell, tying in new rebar and pouring a shelf at 9 to 12 inches deep. Vinyl and fiberglass pools require a different approach using prefabricated inserts.


    Should I replace coping and tile at the same time?

    Doing both together is almost always the better call, since coping removal disturbs the tile band directly beneath it. Separating the two jobs means paying for demolition twice and living with a color mismatch between old tile and new stone.


    What is the difference between coping and decking?

    The capped edge sitting directly on the pool wall is coping, usually stone, concrete or brick and roughly 12 inches wide. Decking is everything beyond it, the walking surface that surrounds the pool and carries furniture, drainage and foot traffic.


    Can pool renovations be done in phases?

    Phasing works well when budget or timing is tight. Structural repairs, interior finish, coping and tile usually go first as one block, with decking, water features and equipment upgrades following in a later season without redoing any finished work.


    Is it worth upgrading to variable-speed equipment during a remodel?

    Variable-speed pumps repay the upgrade quickly through lower energy draw, and a remodel is when the plumbing is open. KC Pool and Spa fits automation, LED lighting and modern filtration during renovations throughout Kansas City, MO, while the pad is apart.