Pool Resurfacing in Kansas City, MO

An Interior Finish That Feels Right Underfoot

Run a hand along the wall, and if it comes back chalky, the interior finish has worn through. KC Pool and Spa provides pool resurfacing for gunite and concrete pools across Kansas City, MO, along with Raymore, Missouri, Leawood, Kansas, and Lenexa, Kansas, stripping tired plaster back to sound substrate and rebuilding the surface that holds your water. Surface work only lasts when the preparation underneath is honest, so we chip out delaminated material, bond structural repairs, then acid-etch the shell before any new coat goes on. Our family-owned crew has been finishing pools since 2012, we hold a general contractor license, carry full insurance, and stand behind materials and workmanship with a 2-year warranty. Quartz, pebble and plaster each cure differently, and we guide startup chemistry so it sets hard instead of staining. Tell us your pool size through our quote form and we will map out a resurfacing plan.

Free Estimate!

For the fastest reply, call or text us 24/7 at 816-890-3537

Free Estimate!

For the fastest reply, call or text us 24/7 at

Contact Us

Pool Resurfacing We Provide

Plaster Resurfacing

White marcite remains the classic interior coat, mixing cement and marble dust into a smooth shell that brightens water instantly. Applied in one continuous pour and troweled to a uniform thickness, it gives an older gunite pool a clean, bright reset.


Quartz Aggregate Finishes

Crushed quartz blended into the plaster adds hardness and color depth that white cement alone cannot hold. The result resists etching and staining longer, keeps its tone through years of sun, and offers blues, grays and tans without a tile budget.


Pebble Interior Finishes

Small river stones exposed at the surface create the longest-lasting interior available, with a texture that hides debris and mineral marks. Polished pebble options soften the underfoot feel, while standard exposure gives the mottled, natural-water look many homeowners want.


Chip-Out and Prep

Old plaster that has delaminated must come off before anything new goes on, so we hydro-chip loose material back to sound gunite. Hollow spots are sounded out by hand, and bond coat goes down only across a genuinely clean shell.


Acid Wash Treatment

Sometimes a dull, stained surface has enough thickness left that stripping a thin layer restores it. A measured acid wash lifts scale, algae shadows and mineral discoloration, buying several more seasons from a finish that is otherwise structurally sound.


Curing and Startup

Fresh interior finish cures underwater, and the first 30 days decide how it looks for the next decade. Brushing daily, holding calcium and alkalinity in range, and easing sanitizer levels upward keeps plaster dust from setting into permanent blotches.

    How Resurfacing Restores Appearance and Durability

    Comfort Returns to the Shallow End

    Worn plaster turns abrasive, and children feel it first on knees, toes and the seat of a swimsuit. Newly troweled plaster brings back the smooth, cool feel that makes people linger in the water instead of climbing out early.

    Water That Reads Deep and Clear

    Color in a pool comes from the interior, not the water itself, so a stained gray shell makes everything look tired. Resurfacing restores that clean blue depth and photographs the way you imagined the backyard when you built it.

    Chemistry That Stops Fighting You

    Rough, porous plaster harbors algae in every pit and eats sanitizer trying to reach it. Sealing the shell with a dense new surface cuts chlorine demand noticeably, and weekly balancing becomes a five-minute job rather than a running battle.

    A Shell That Holds Water

    Cracked, hollow plaster lets water reach the gunite behind it, and what starts as seepage becomes rebar corrosion. Replacing the interior over properly repaired substrate closes that path, so the level you set stays put and the structure stops quietly degrading.

    10 to 15 More Years of Use

    Modern interior finishes carry real service life, with quartz and pebble commonly running past 15 years when chemistry stays balanced. That turns a single project into more than a decade of swimming before the subject of resurfacing comes up again.

    Less Time Behind a Brush

    Stains cling to pitted surfaces, which is why scrubbing an old pool never quite works. Dense new plaster gives dirt nothing to grip, so the vacuum picks up what settles and brushing drops to a quick weekly pass around the waterline.

    Testimonials


    See What Our Customers Are Saying!

    A Finish Built to Last the Next Decade

    Interior finish is the one part of a pool nobody notices until it fails, and by then it has usually taken the water chemistry down with it. KC Pool and Spa approaches resurfacing in Kansas City, MO, as two jobs rather than one: repairing whatever the drained shell reveals, then applying a finish that bonds to solid material. All three finishes have a place, and the right answer depends on how you use the pool and how long you plan to keep it. Look at the options without any pressure to decide today, then send your details through our quote form when you are ready.
    Frequently Asked Questions

    How long does pool resurfacing take from start to finish?

    Most resurfacing projects run 5 to 10 days on site, covering drain, chip-out, repairs, application and refill. Curing and startup chemistry then continue for about a month, though swimming usually resumes within a week or so of the refill being finished.


    What is the difference between plaster, quartz and pebble finishes?

    Plaster is cement based and the most affordable, quartz adds crushed stone for hardness and color retention, and pebble exposes river stone for maximum durability. Texture rises in that same order, so comfort underfoot trades against expected service life.


    Do I need to drain my pool to resurface it?

    Yes, the shell has to be completely empty for chip-out, repair and application. KC Pool and Spa times drawdowns around the water table in Kansas City, MO, since an empty pool can shift or float when groundwater sits high.


    What causes new plaster to stain or turn gray?

    Gray blotching usually comes from calcium imbalance, uneven troweling or aggressive startup chemistry during the first month. Metals in fill water, especially copper and iron, produce green and rust-toned staining that shows up weeks after the pool is filled.


    Can I swim right after my pool is resurfaced?

    Swimming can start once the water is balanced and the filter has run a full cycle, typically within a week of refilling. Expect to brush daily through the first month while the finish hardens and plaster dust settles out of suspension.


    Is an acid wash enough instead of a full resurface?

    An acid wash works only when the existing plaster still has thickness and bonds firmly to the shell. Once you can feel exposed aggregate, hear hollow spots or see rebar shadows, washing removes material the pool cannot afford to lose.


    Should I brush new plaster every day?

    Daily brushing matters more than almost anything else during the first 30 days, because it knocks loose plaster dust into suspension where the filter can catch it. Skipping it leaves that dust to bond into permanent rough streaks across the finish.


    What are the signs my pool needs a new interior finish?

    Exposed aggregate underfoot, hollow-sounding patches, spreading crack lines and stains that no longer respond to brushing all signal a finish at the end of its life. Homeowners across Kansas City, MO, call KC Pool and Spa to inspect the drained shell first.